 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| This is our Garden Mount, It is 60" tall, there is a silver rod that comes with the garden mount. The silver rod goes into the ground about 18" and then you slip over the garden mount. It looks wonderful in a flower garden |
| This is our Roof Mount, It is 15" and fits the Roof Perfectly |
| This is our Post Mount, it is also 15" and it is a side mount that has 3 x 3 plate |
| This is our Deck mount , It also has a 3 x 3 plate that goes onto your deck |
| Gazebo mounts, you can either get a three or four sided, They look beautiful on any Gazebos. |
| Instructions & Tips 1) Place the garden mount into the ground by pushing it into the ground or by using a piece of 5/16 x 3 ft. Rod. Drive the rod half way into the ground. Place the garden mount over the top of the rod. (If you have the two piece mount, screw together first) 2) Place the Directional over the pole until it stops (approx. 6" from the tip on the 60" one piece mount). Point the N to the north and tighten the screw that is located between the N and the E. 3) Slide the windcups onto the pole with the ball bearing side down. 4) Place the design top onto the pole |
| To keep your weather vane topper moving freely, you can put a little bit of Vaseline on the top of the pole |
| All of Our Weather Vanes have a clear durability |